UPC 986-2 AEMI-M
PRODUCT DATA
UPC 986-2 AEMI is an Acrylic-Epoxy
UPC 986-2 AEMI Acrylic-epoxy is a single component water borne coating formulated for use over steel or concrete. It has a very low odour, UV stability, non-flammable and corrosion resistant. UPC 986-2 can be applied by brush roller or spray. Clean-up with water.
PRODUCT FEATURES
Single Component & Water Borne Ultraviolet Resistant
Low Odour & Low Volatility Excellent Stain Resistant
Easy To Apply, Roll or Spray Abrasion Resistant
Corrosion Resitant Superior Adhesion
Chemical Solvent & Acid Resistant Gloss & Colour Retention
PRODUCT LIMITATIONS
Apply above 12°C.
- Not recommended for substrate
temperatures above 120°C.
- Not recommended for continuous immersion
service.
- Not approved for incidental food
service.
TECHNICAL DATA
Product Identification: UPC 986-2
AEMI Generic Type: Acrylic-Epoxy Coating
Sheen: Semi-Gloss
Solids by Volume: 37%
Recommended Dry Film:
Thickness Per Coat: 2-3 Mils
Theroretical Coverage Per Coat: 100 Sq. ft. Per 20L
Total Solids by Weight: 48 - 51%
VOC Lbs: Imperial Gallon is 2.32
Dry Time: 25°C. at 50% Humidity - Touch Dry 60 - 90 minutes. Full cure
is approx. 14 days. Reducer: Distilled Water
Clean-Ups: Water & Detergent
OUR GREEN PAINTS COME IN ALL COLOURS |