| UPC 986-10 Special
Laboratory Primer-Finish UPC 986-10 Lab Coating is a single component, white vinyl-acrylic
water-borne Primer Finish for use in laboratories. It has virtually
no odour when being applied. UPC 986-10 is resistant to formaldahyde
gas for a minimum of 18 hours, and is also resistant to a solution
of chlorine used as a wash-down. It is non-flammable and mildew
resistant.
SPECIAL FEATURES
Mildew Resistant - Anti Fungi - Anti Bacteria - No Smell! Resistant
to Chlorine Solution of 6% - Resistant to Formaldehyde Gas
for a period of 18 hours minimum.
CHARACTERISTICS
- Colour Finish - White - can be titnted
if necessary.
- Dry Schedule - To Touch - 40 minutes approximately
- Recoat 4 to 6 hours.
- Recommended spread rate - 200 Sq.
ft. per US Gal. @ WFT - 6mls - DFT 3 Mils
- Maximum dry file
thickness - 6 WFT - Sprayed.
- Solids by Volume - 49.5%=+/-
2%
- VOC - CA250 grams per litre.
NOTE:
UPC 986-10
Submersible Primer Finish may be used as a one coat system.
Over previously painted sufaces in good condition. When
used as a primer finish over concrete, two coats are recommended.
When used as a primer - follow with one or two coats
of the recommended finish.
Limitation: Do not intermix
- They are not compatible
Precaution: Do not allow to freeze.
APPLICATION INFORMATION
Temperature -
10 - 30°C range
Relative Humidity -
85%
Method of application -
Spray - Roll or Brush
Tinting -
Can be titnted with univeral colorant at 75% strength up to
2oz. per gallon.
Thinners -
Can be reduced by 10% - Use product as is - Dilute only when
necessary.
OUR
GREEN PAINTS COME IN ALL COLOURS |
